Left Diff Hub Adjustment

Here I will show you guys how to adjust the left diff hub so that you have a smoother, bind free, zero to minimal play on that rear left diff hub.

First, you'll need the backing paper from the tire tape. Then your allen wrench to tighten the set screw.

With the left wheel out and left diff hub loose, squeeze the paper right in between the left bearing inner raise and left hub. You can try to put a little bit of pressure onto the left hub towards the motor, then tighten the set screw. 

With the pinion off, and left hub tight in its place, try spinning the diff shaft with your finger. It should spin freely without side to side slop or binding. If there's slop, try repeating the step but this time with a little bit more pressure on the diff hub before tightening the set screw. If binding, put less pressure on the hub.

And there you go, another quick and easy tuning tips. Hope this helps our newbies/experienced drivers. :)

Thanks for reading!