Fast Pace Racing

Welcome to the finest indoor RC racing shop in the Bay Area!  Our track is currently the largest at over 900 sq. ft!  Aside from our vast selection of Mini-Z replacement and performance parts (PN, Atomic, Kyosho -- to name a few!), we also carry E-flite helis and parts, and the new MicroCrawler from Losi.  Our customer service is unparalleled in our industry.  You will leave our shop knowing you were completely taken care of -- that's the FPR promise.  Swing by and race your Mini-Z, Xmod, Iwaver, and other on-road 1/24th- 1/28th scale R/C today!

 

TJ's blog

TJ's picture

SC430 Test Body

Posted Tue, 09/22/2009 - 11:07am by TJ
For those of you that don't know, I have been running this body since 2008 at RCX. Why? Well the plastic that was used for this body is different from the one you have on your autoscale red/silver SC430. The testbody seemed to have the same or maybe close to the white body and both bodies can take more abuse than the fragile autoscale (red/silver) body. Why not just get the white body? I don't paint and I like the looks of autoscale body vs garage paint. One of the reason why I like mini-z is because of it's details and if I have to paint the body, I might as well run the body white. I think the unpainted white looks sick too but not when everyone's car is white. :D

I did a little bit of modification to the body like:

TJ's picture

MR03 Pre-order

Posted Wed, 09/16/2009 - 5:16pm by TJ

Hi,

This is going to be a hot item! Kyosho Mini-Z MR03! We should have this item early Nov. 2009. For pre-orders, please email peter@fastpaceracing.com.

Thanks!

TJ's picture

9/18/09 A-Arm V2 updated... I swear this is it. :P

Posted Tue, 09/01/2009 - 12:41am by TJ
Definitely want to use the v2 double A-arm. It makes the car much more consistent versus the first version. I think the only difference is the plastic ball joint but I could be wrong. The new v2 double a-arm is so smooth that it makes the car very consistent. Imagine having an initial turn-in running white springs on a PN 20 slicks. :)
TJ's picture

Friday Night Race

Posted Sat, 08/29/2009 - 1:01am by TJ
It was fun racing tonight as we had about 26 drivers! Results posted under "race results".

Thank you and see you guys soon!

TJ's picture

Tuesday Night Race @ ASH

Posted Wed, 08/26/2009 - 1:37pm by TJ
...All Speed Hobbies located in South San Francisco, Ca.

I try to find time to go to ASH every Tuesdays for their races. It is always nice to see new drivers and race with top drivers like Layman Reid who recently took 3rd place for 2wd stock in PNWC Regional and Romel Tuazon who took 1st in 2wd mod and awd stock here in Northern Cali and PN Racing's own, Doug Graham.

TJ's picture

Congrats to...

Posted Mon, 08/24/2009 - 3:05pm by TJ
Fast Pace Racing would like to Congratulate the winners of 2009 West Coast PNWC Regional that was held in Cupertino, Ca.

2wd Stock Class:
1st Chad Nelson
2nd Stephen Bui
3rd Laymen Reid
 
TJ's picture

RCP Track 24x 15 Tiles ! ! !

Posted Mon, 08/24/2009 - 2:26pm by TJ
To maximize the space that we have, we will house a RCP track layout that consist of 24 tiles x 15 tiles! We normally have 22x12 but to make it a bit easier to drive for our new and mod drivers, we will make some of our wide corners, wider. :)

This track layout should be up soon!

TJ's picture

Thursday Night Test n Tune

Posted Wed, 08/19/2009 - 12:39am by TJ

Don't forget, this Thursday we'll have some test and tune night. Bring your cars in for some check up. ;) Also this Friday, we'll open our mod class. So dust off those stockR, Chilli or even your PN's 33 turn motor and slap them in your 2wd or AWD. This is perfect practice before atomics race. I know I need to practice mod class. :)